Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Power down the TiVo Premiere XL4 by detaching the power cable from the unit and power source.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the four 80 mm T10 screws from the back of the TiVo box using theTorx screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Take the outer casing by sliding the top of the box off of the component carefully, making sure not to damage the surrounding components inside.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 140 mm T8 screw from the back of the TiVo premiere XL4 box holding the power supply in place using a Torx screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 80 mm T10 screws from the power supply using a Torx screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the power cable from the motherboard by gently pinching the connector.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pinch the two plastic plugs and lift the power supply to detach the plugs from the board.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.