Introducción
Make sure you have a replacement ready! This will involve some drive formatting.
Qué necesitas
-
-
-
Carefully remove two Phillips screws with a Phillips 0 screwdriver
-
-
-
Remove the 4 identical Phillips screws with a Phillips 00 screw driver (they are on both sides).
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
6 personas más completaron esta guía.
Un comentario
Almost perfect instructions. I do recommend removing the active pen first. Also it's a good idea to remind people that the active pen holder is screwed to the case cover from the inside and will come out as part of the cover.
Ten screws, but who’s counting. Thank you!
jthrall - Contestar