Saltar al contenido principal

ThinkPad X1 Carbon Wireless Card Replacement

Qué necesitas

  1. ThinkPad X1 Carbon Wireless Card Replacement, Loosen Cover Screws: paso 1, imagen 1 de 1
    • Using the #0 Phillips screwdriver, loosen the seven cover screws. they will not come all of the way out.

  2. ThinkPad X1 Carbon Wireless Card Replacement: paso 2, imagen 1 de 1
    • Using the spudger pop the cover loose and remove.

  3. ThinkPad X1 Carbon Wireless Card Replacement, Disconnect Battery: paso 3, imagen 1 de 1
    • Use only plastic tools to disconnect battery cable

    • Slide battery connector in the direction if the arrow to disconnect.

    • You can leave the battery or remove it using the red circles for the screw locations.

  4. ThinkPad X1 Carbon Wireless Card Replacement: paso 4, imagen 1 de 1
    • Remove screw holding the wireless card in place.

  5. ThinkPad X1 Carbon Wireless Card Replacement, Remove Antenna Cables: paso 5, imagen 1 de 1
    • Carefully remove the antenna cables and slide out the card in the direction of the arrow.

    • The gray connector is on the top. The black connector is closer to the battery.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Mike

Miembro Desde 06/23/16

1,834 Reputación

5 Guías creadas

Equipo

iReconstruction Miembro de iReconstruction

Business

1 Miembro

11 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 9

Ultimos 30 días: 45

Todo El Tiempo: 5,391