Repara tus cosas Comunidad Tienda

The Claw Battery Replacement

Introducción

This guide will teach you how to properly replace the batteries in your Claw Machine. If you are experiencing any power related issues with your device follows these steps.

Qué necesitas

  1. The Claw Battery Replacement, Batteries: paso 1, imagen 1 de 1

    • Hold The Claw machine upright so that the controls are facing you.

    Editar

  2. The Claw Battery Replacement: paso 2, imagen 1 de 1

    • Turn the device upside down keeping the controls facing in your direction.

    Editar

  4. The Claw Battery Replacement: paso 3, imagen 1 de 1

    • Locate the battery compartment door on the bottom cover of The Claw.

    • Loosen the screw from the battery compartment door with your phillips head screwdriver.

    Editar

  5. The Claw Battery Replacement: paso 4, imagen 1 de 1

    • Open the door and insert the 3 D-cell batteries using the correct configuration that is labeled on the inside of the compartment.

    • If the batteries are not placed in the right configuration the device will not operate. make sure to identify positive and negative sides of the battery and follow the configuration on the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 2 otros colaboradores

Alain Pierre

Miembro Desde 03/22/16

1,188 Reputación

9 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

UMass Dartmouth, Team 4-8, Catania Spring 2016 Miembro de UMass Dartmouth, Team 4-8, Catania Spring 2016

UMASSD-CATANIA-S16S4G8

3 Miembros

18 Guías creadas

Un comentario

daiobn ht45o9iyjugggjvj nvj vnv jnkrfdoelcbigvfcofrbbvfgb4vg3rcf2edebb

Jennifer Mateo - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 7

Ultimos 30 días: 34

Todo El Tiempo: 2,935