Saltar al contenido principal

The Beatles Rock Band Drum Set Drum Pad Replacement

Qué necesitas

  1. The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: paso 1, imagen 1 de 2 The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: paso 1, imagen 2 de 2
    • Pry the drum pad off of the drum set.

    • This will take significant force, but the rubber on the drum pad can withstand the force.

  2. The Beatles Rock Band Drum Set Drum Pad Replacement: paso 2, imagen 1 de 2 The Beatles Rock Band Drum Set Drum Pad Replacement: paso 2, imagen 2 de 2
    • Remove the small wire clip shown in the picture.

    • If this wire is already disconnected, that is most likely the cause for the drum pad not working.

  3. The Beatles Rock Band Drum Set Drum Pad Replacement: paso 3, imagen 1 de 1
    • Remove the four Phillips size J0 screws supporting the hit sensor.

    • There is a small plastic disk and a spring in the support; be sure not to lose it.

  4. The Beatles Rock Band Drum Set Drum Pad Replacement: paso 4, imagen 1 de 1
    • The sensor can be peeled off of the drum pad.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Zach Richter

Miembro Desde 01/24/17

549 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 13-3, Banghart Winter 2017 Miembro de Cal Poly, Team 13-3, Banghart Winter 2017

CPSU-BANGHART-W17S13G3

4 Miembros

5 Guías creadas

Un comentario

Where can you buy replacement sensor?

Barry Howard - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 24

Ultimos 30 días: 105

Todo El Tiempo: 8,036