Saltar al contenido principal

Texas Instruments TI-83 Plus Back Case Replacement

Qué necesitas

  1. Texas Instruments TI-83 Plus Back Case Replacement, Backup Battery: paso 1, imagen 1 de 2 Texas Instruments TI-83 Plus Back Case Replacement, Backup Battery: paso 1, imagen 2 de 2
    • Remove the battery cover.

    • Remove the AAA batteries from the calculator.

  2. Texas Instruments TI-83 Plus Back Case Replacement: paso 2, imagen 1 de 1
    • Remove the 5mm Philips #00 screw holding backup battery cover.

    • Remove the backup battery cover.

  3. Texas Instruments TI-83 Plus Back Case Replacement: paso 3, imagen 1 de 1
    • Use plastic opening tool to remove the backup battery. Place the tool in the small cut-out next to the battery and pry the battery out.

    • Be careful, the backup battery is spring loaded and may shoot up when you remove it.

  4. Texas Instruments TI-83 Plus Back Case Replacement, Back Case: paso 4, imagen 1 de 1
    • Unscrew the six 7.5mm T6 screws on the back case. You will need to use a screwdriver with a long and skinny head.

  5. Texas Instruments TI-83 Plus Back Case Replacement: paso 5, imagen 1 de 2 Texas Instruments TI-83 Plus Back Case Replacement: paso 5, imagen 2 de 2
    • Pry back case off. Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart.

Conclusión

To reassemble your device, follow these instructions in reverse order.

8 personas más completaron esta guía.

Jared

Miembro Desde 10/02/12

151 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 18-37, Regan Fall 2012 Miembro de Cal Poly, Team 18-37, Regan Fall 2012

CPSU-REGAN-F12S18G37

5 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 12

Ultimos 30 días: 35

Todo El Tiempo: 9,798