Saltar al contenido principal

Texas Instruments TI-5130 Printer Unit Replacement

Qué necesitas

  1. Texas Instruments TI-5130 Printer Unit  Replacement, Printer Unit: paso 1, imagen 1 de 2 Texas Instruments TI-5130 Printer Unit  Replacement, Printer Unit: paso 1, imagen 2 de 2
    • Flip the calculator over and remove the 4 main 10mm screws with a PH1 screwdriver.

  2. Texas Instruments TI-5130 Printer Unit  Replacement: paso 2, imagen 1 de 1
    • Flip the calculator back over and remove the top cover.

  3. Texas Instruments TI-5130 Printer Unit  Replacement: paso 3, imagen 1 de 1
    • Disconnect the printing unit from the motherboard by pulling up on the connector – located in the bottom left of the motherboard.

  4. Texas Instruments TI-5130 Printer Unit  Replacement: paso 4, imagen 1 de 1
    • Remove the ink cartridge by pushing the tab back then lifting it out to gain access to the screw that holds the printer in place.

  5. Texas Instruments TI-5130 Printer Unit  Replacement: paso 5, imagen 1 de 2 Texas Instruments TI-5130 Printer Unit  Replacement: paso 5, imagen 2 de 2
    • Using a PH1 screwdriver remove the 10mm screw that holds down the printer unit.

    • Remove the printer unit by lifting it up.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Shannon Perkins

Miembro Desde 09/17/15

652 Reputación

3 Guías creadas

Equipo

2 comentarios

wehre did you buy the replacement printer

Tino ullrich - Contestar

what sources are there for TI-5130 printer unit?

Norman Todd - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 10

Todo El Tiempo: 2,278