Repara tus cosas Comunidad Tienda

Tesla Model S Key Fob Battery Replacement

Introducción

Use this guide to assist in replacing the battery in a Tesla Model S keyless fob remote. A Tesla key fob assists the user in accessing their Tesla vehicle from a distance. The key fob also allows the user to perform various remote functions such as door unlock/lock as well as a front and rear trunk hatch open button. Due to everyday use, the fob may begin to operate intermittently over time. This may be a result of the battery needing to be replaced. There are no special skills or tools required to complete this task.

Qué necesitas

  1. Tesla Model S Key Fob Battery Replacement, Key Fob Battery: paso 1, imagen 1 de 3 Tesla Model S Key Fob Battery Replacement, Key Fob Battery: paso 1, imagen 2 de 3 Tesla Model S Key Fob Battery Replacement, Key Fob Battery: paso 1, imagen 3 de 3

    • Remove the protective case from the key fob.

    • This step is optional; not everyone has a protective case.

    Editar

  2. Tesla Model S Key Fob Battery Replacement: paso 2, imagen 1 de 3 Tesla Model S Key Fob Battery Replacement: paso 2, imagen 2 de 3 Tesla Model S Key Fob Battery Replacement: paso 2, imagen 3 de 3

    • Insert the flat end of a spudger into the notch, and gently pry the key fob open along the seam.

    • Separate the cover from the key fob.

    Editar

  4. Tesla Model S Key Fob Battery Replacement: paso 3, imagen 1 de 3 Tesla Model S Key Fob Battery Replacement: paso 3, imagen 2 de 3 Tesla Model S Key Fob Battery Replacement: paso 3, imagen 3 de 3

    • Insert the flat end of a spudger into the entry point at the top of the key fob.

    • Lightly push the spudger under the battery.

    • Remove the battery from the key fob.

    Editar

  5. Tesla Model S Key Fob Battery Replacement: paso 4, imagen 1 de 3 Tesla Model S Key Fob Battery Replacement: paso 4, imagen 2 de 3 Tesla Model S Key Fob Battery Replacement: paso 4, imagen 3 de 3

    • With your fingers, insert a new CR2032 battery into the opening.

    • Ensure correct placement of the battery by having the writing facing up toward you and the blank side with a number facing down inside the battery opening.

    • Push the battery with your thumb to lock it into place.

    Editar

  6. Tesla Model S Key Fob Battery Replacement: paso 5, imagen 1 de 3 Tesla Model S Key Fob Battery Replacement: paso 5, imagen 2 de 3 Tesla Model S Key Fob Battery Replacement: paso 5, imagen 3 de 3

    • To close the key fob, enter the wider side of the cover into the opening in the middle of the key fob.

    • You should see the end of the cover a little popped out.

    • With your thumb and pointer finger push together the cover and the key fob to allow for the key fob to be securely closed.

    Editar

  7. Tesla Model S Key Fob Battery Replacement: paso 6, imagen 1 de 3 Tesla Model S Key Fob Battery Replacement: paso 6, imagen 2 de 3 Tesla Model S Key Fob Battery Replacement: paso 6, imagen 3 de 3

    • This step is optional (not everyone has a case).

    • Place the key fob into the opening of the case.

    Editar
Linea de Meta

2 personas más completaron esta guía.

Autor

con 6 otros colaboradores

Stefanie Ayala

Miembro Desde 03/19/22

175 Reputación

1 Guía escrita

Insignias: 5

+ 2 más insignias

Equipo

CSU Los Angeles, Team 4-3, Briggs Spring 2022 Miembro de CSU Los Angeles, Team 4-3, Briggs Spring 2022

CSULA-BRIGGS-S22S4G3

1 Miembro

1 Guía escrita

Un comentario

Really, that tip was helpful, the last time i my model s tesla key fob's battery was dead, I order another on amazon, and some tips online here on tesla key fob programming. At first, I was a little bit skeptical given that I have not done such a thing before on my tesla. However, the process was really simple and the guide on the site was helpful.

Ayo Idowu - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 20

Ultimos 30 días: 68

Todo El Tiempo: 4,923