Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the digitizer cable from is socket, flip the brown clasp up from indicated edge and gently remove the cable.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Separate the logic board from front display. Apply heat to the front glass to loosen the adhesive, using a prying tool to separate the board. Be careful and move slowly, it is very strong.
-
Be careful to remove the display first from the right side as there are clips along the left side.
-
Ensure not to damage the LCD cable, remove once accessible by releasing the brown clasp from indicated side.
-
