Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Partes

No se especificaron partes.

  1. Remove back cover by applying pressure and sliding up towards the top of the phone. Remove back cover by applying pressure and sliding up towards the top of the phone. Remove back cover by applying pressure and sliding up towards the top of the phone.
    • Remove back cover by applying pressure and sliding up towards the top of the phone.

  2. Remove the battery by lifting from slot on the right hand side. Remove the battery by lifting from slot on the right hand side.
    • Remove the battery by lifting from slot on the right hand side.

  3. Use Multimeter to test the voltage of the battery. Put the black lead into ground slot of multimeter and the red lead into the V(ohm)mA slot.
    • Use Multimeter to test the voltage of the battery.

    • Put the black lead into ground slot of multimeter and the red lead into the V(ohm)mA slot.

    • Place the red and black leads to the two outside metal plate, each on opposite sides, on the battery as shown.

    • Check that the voltage displayed on the multimeter matches closely to the voltage defined on the battery. Normally 3.7 V.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Melinda Phan

Miembro Desde 17/04/11

435 Reputación

9 Guías creadas

Equipo

Cal Poly, Team 9-64, Walters Spring 2011 Miembro de Cal Poly, Team 9-64, Walters Spring 2011

CPSU-WALTERS-S11S9G64

5 Miembros

9 Guías creadas

Hello one the question was tablet not telephone and it's really vague how you guys explain these things you need to go to work on your site

Roger Slater - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 22

Ultimos 30 días: 93

Todo El Tiempo: 7,304