Introducción

This guide will help you replace your faulty volume knob. This guide should only be looked at after completing the Disassembly Guide.

Partes

No se requieren partes.

  1. Remove the screws that are holding the circuit board in place. Remove the screws that are holding the circuit board in place.
    • Remove the screws that are holding the circuit board in place.

  2. Pull the circuit board out to reveal the inside of the display. Pull the circuit board out to reveal the inside of the display.
    • Pull the circuit board out to reveal the inside of the display.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove the screws and the black piece that are holding the volume control knob in place. Remove the screws and the black piece that are holding the volume control knob in place. Remove the screws and the black piece that are holding the volume control knob in place.
    • Remove the screws and the black piece that are holding the volume control knob in place.

  5. Pull the volume control knob from the outside and the white piece on the inside until they separate. Replace the volume knob with a new one to complete the repair.
    • Pull the volume control knob from the outside and the white piece on the inside until they separate.

    • Replace the volume knob with a new one to complete the repair.

Conclusión

To reassemble your device, follow these instructions in reverse order and follow the disassembly guide instructions in reverse order.

2 personas más completaron esta guía.

Oliver Kunz

Miembro Desde 26/09/12

107 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 2-61, Propen Fall 2012 Miembro de Cal Poly, Team 2-61, Propen Fall 2012

CPSU-PROPEN-F12S2G61

4 Miembros

5 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 6

Últimos 30 Días: 19

Todo El Tiempo: 3,336