Introducción

The stylus, which actually reads the record and transmits the signal, wears out over time. According to the TEAC manual for this device, that should be around 50 hours. Replacing or cleaning the stylus will help improve sound quality if done correctly, but should be done very carefully.

Turn off record the player before making repairs. Unplug the record player.
  • Turn off record the player before making repairs.

  • Unplug the record player.

Agregar Comentario

Open the lid to access the turntable, arm, and stylus. Open the lid to access the turntable, arm, and stylus.
  • Open the lid to access the turntable, arm, and stylus.

Agregar Comentario

Press down on the front of the red stylus and pull forward to remove it from the arm.
  • Press down on the front of the red stylus and pull forward to remove it from the arm.

Agregar Comentario

Insert a new stylus by pushing it back up where the old one was, or, if necessary, clean the old one and replace likewise.
  • Insert a new stylus by pushing it back up where the old one was, or, if necessary, clean the old one and replace likewise.

Agregar Comentario

Linea de Meta

Una persona más ha completado esta guía.

Charles Lockner

Miembro Desde 17/09/12

103 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 2-61, Propen Fall 2012 Miembro de Cal Poly, Team 2-61, Propen Fall 2012

CPSU-PROPEN-F12S2G61

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 5

Últimos 30 Días: 9

Todo El Tiempo: 1,176