Saltar al contenido principal

Partes

No se especificaron partes.

  1. Before you start, disconnect the device from its power source. Remove the two bottom screws. Remove the two top screws.
    • Before you start, disconnect the device from its power source.

    • Remove the two bottom screws.

    • Remove the two top screws.

    • Remove the handle from the kettle.

  2. Pull out the switch. If you pull too hard, you may dislodge another part as well as the spring that are both positioned behind the switch.
    • Pull out the switch.

    • If you pull too hard, you may dislodge another part as well as the spring that are both positioned behind the switch.

  3. Click the replacement switch back into the handle part.
    • Click the replacement switch back into the handle part.

  4. Insert the light back into the switch.
    • Insert the light back into the switch.

    • This might take some extra attention, so be precise.

  5. Place the handle part back on the frame.
    • Place the handle part back on the frame.

  6. Plug in the kettle.
    • Plug in the kettle.

    • Press down on the switch to check if it works again.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

3 comentarios

How much would it cost to repair this kettle switch live points?

Bheki Valoyi - Contestar

How much would it cost to fix the tea kettle switch live points?

Bheki Valoyi - Contestar

Can the kettle gadgets be replaced with another one

Michael Ombech - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 7

Ultimos 7 días: 55

Ultimos 30 días: 213

Todo El Tiempo: 18,735