Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Removing a white unibody Macbook disk drive.

Partes

No se especificaron partes.

  1. Remove the six Phillips head screws with J00 bit. Remove the six Phillips head screws with J00 bit. Remove the six Phillips head screws with J00 bit.
    • Remove the six Phillips head screws with J00 bit.

  2. Then Unplug the battery using a ESD Safe prying tool. Then Unplug the battery using a ESD Safe prying tool. Then Unplug the battery using a ESD Safe prying tool.
    • Then Unplug the battery using a ESD Safe prying tool.

  3. SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación

    SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación
  4. Once Battery is Unplugged Remove two Philips head screws using J00 Bit. Once Battery is Unplugged Remove two Philips head screws using J00 Bit. Once Battery is Unplugged Remove two Philips head screws using J00 Bit.
    • Once Battery is Unplugged Remove two Philips head screws using J00 Bit.

  5. After removing the screws and plastic cover piece, remove the hard drive then unplug from Logic Board. After removing the screws and plastic cover piece, remove the hard drive then unplug from Logic Board. After removing the screws and plastic cover piece, remove the hard drive then unplug from Logic Board.
    • After removing the screws and plastic cover piece, remove the hard drive then unplug from Logic Board.

  6. Locate the RAM Directly above the Hard Drive. Gently push the two snaps away from the RAM cards and gently pull the ram out. You Will do this step again to remove the Second card beneath the first. Locate the RAM Directly above the Hard Drive. Gently push the two snaps away from the RAM cards and gently pull the ram out. You Will do this step again to remove the Second card beneath the first. Locate the RAM Directly above the Hard Drive. Gently push the two snaps away from the RAM cards and gently pull the ram out. You Will do this step again to remove the Second card beneath the first.
    • Locate the RAM Directly above the Hard Drive. Gently push the two snaps away from the RAM cards and gently pull the ram out. You Will do this step again to remove the Second card beneath the first.

Conclusión

To reassemble your device, follow these instructions in reverse order.

7 personas más completaron esta guía.

Gyoyo

Miembro Desde 09/12/16

299 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 22

Ultimos 30 días: 89

Todo El Tiempo: 5,020