Saltar al contenido principal

Tagital T9X Camera Replacement

Qué necesitas

  1. Tagital T9X Camera Replacement, Back Cover: paso 1, imagen 1 de 1
    • With the tablet turned off, remove the two 5mm Phillips head screws from the top of the tablet.

    • These screws are extremely easy to lose. Be sure to store them in a safe place.

  2. Tagital T9X Camera Replacement: paso 2, imagen 1 de 1
    • Use a 1 cm wide plastic opening tool to remove the back panel. Go around the entire back panel to ensure safe removal.

    • The power, return, and volume buttons are not firmly secured to the panel; it is likely they will fall off in the process of removing the panel.

  3. Tagital T9X Camera Replacement, Camera: paso 3, imagen 1 de 1
    • Using tweezers, carefully remove the cloth covering from the ribbon connector for the camera.

  4. Tagital T9X Camera Replacement: paso 4, imagen 1 de 1
    • Use the tip of the spudger or your fingernail to flip up the small flap on the ZIF connector.

    • Carefully remove the ribbon cable from the connector.

  5. Tagital T9X Camera Replacement: paso 5, imagen 1 de 1
    • Remove the camera from its position at the top of the tablet.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 141