Introducción

Removing the TRS-80 Color Computer's motherboard.

Partes

No se requieren partes.

Flip the computer over.
  • Flip the computer over.

  • Remove the two 24.1mm Phillips screws near the front of the case.

  • Remove the five 33.0 mm Phillips screws towards the back of the case.

Agregar Comentario

Carefully flip the computer right side up.
  • Carefully flip the computer right side up.

  • Lift off the top half of the case.

Agregar Comentario

  • Near the motherboard, gently pull the keyboard ribbon cable until it becomes free.

  • Lift the keyboard out of the case.

Agregar Comentario

  • Remove the nine 15.24 mm Phillips screws securing the motherboard in place.

  • When removing the spring door, make sure to keep the door closed.

Agregar Comentario

  • Remove the 5 jumper cables from the motherboard.

  • Once the jumper cables lift the motherboard up gently; it should lift out easily.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Andrew

Miembro Desde 23/01/11

442 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 11-24, Maness Winter 2011 Miembro de Cal Poly, Team 11-24, Maness Winter 2011

CPSU-MANESS-W11S11G24

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 13

Todo El Tiempo: 2,906