Introducción

This guide can be used to replace the wires to ensure that all the wires are connected correctly for your Swann Doorphone Video Intercom.

Partes

No se requieren partes.

  1. Flip the monitor of the Swann Doorphone over so that the underside is facing up. Grip the sides of the black rectangular frame where they extend outwards and pull down. After pulling down, pull the frame towards you to remove it from the monitor.
    • Flip the monitor of the Swann Doorphone over so that the underside is facing up.

    • Grip the sides of the black rectangular frame where they extend outwards and pull down.

    • After pulling down, pull the frame towards you to remove it from the monitor.

  2. Using the JIS #0 screwdriver, unscrew the 2 mm screw in terminal 1 with the blue wire underneath. Pull the blue wire out from beneath the metal plate. Be careful when removing the screw from terminal 1, the metal plate behind the screw is not connected and may fall off.
    • Using the JIS #0 screwdriver, unscrew the 2 mm screw in terminal 1 with the blue wire underneath.

    • Pull the blue wire out from beneath the metal plate.

    • Be careful when removing the screw from terminal 1, the metal plate behind the screw is not connected and may fall off.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Flip the outdoor camera over so that the underside is facing up. Remove the back cover by grabbing the sides of the camera and pulling towards your body. Remove the back cover by grabbing the sides of the camera and pulling towards your body.
    • Flip the outdoor camera over so that the underside is facing up.

    • Remove the back cover by grabbing the sides of the camera and pulling towards your body.

  5. With the back cover of the outdoor camera off, press the first gray square button with blue wire down. While pressing the gray square button,  remove the blue wire from the first opening under the button. Be sure to remove the same color wire for the outdoor camera as was used for the indoor video intercom.
    • With the back cover of the outdoor camera off, press the first gray square button with blue wire down.

    • While pressing the gray square button, remove the blue wire from the first opening under the button.

    • Be sure to remove the same color wire for the outdoor camera as was used for the indoor video intercom.

    • In this guide, we are using the blue wire in terminal 1 for the audio. As a recommendation; * Use the blue wire in terminal 1 for the audio wire. * Use the brown wire in terminal 2 for the ground wire. * Use the green wire in terminal 3 for the video wire. * Use the black wire in terminal 4 for the power wire.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Emily Stenke

Miembro Desde 14/02/18

525 Reputación

4 Guías creadas

Equipo

USF Tampa, Team S2-G4, Eyestone Spring 2018 Miembro de USF Tampa, Team S2-G4, Eyestone Spring 2018

USFT-EYESTONE-S18S2G4

4 Miembros

5 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 18

Todo El Tiempo: 274