Supersonic SC-777BT Touchscreen Sensor Replacement

Introducción

If your touchscreen does not respond to a finger or stylus, you need to replace the touchscreen sensor. As a prerequisite, use the motherboard replacement guide to reveal the touchscreen after opening the back.

Qué necesitas

Paso 1 Touchscreen Sensor

Supersonic SC-777BT Touchscreen Sensor Replacement, Touchscreen Sensor: paso 1, imagen 1 de 2

Supersonic SC-777BT Touchscreen Sensor Replacement, Touchscreen Sensor: paso 1, imagen 2 de 2

Pull the yellow ribbon cable to dislodge the screen from the plastic screen cover.

Editar

Paso 2

Supersonic SC-777BT Touchscreen Sensor Replacement: paso 2, imagen 3 de 3

Tear the yellow tape in order to make the front and back covers free to disassemble.

Editar

Paso 3

Supersonic SC-777BT Touchscreen Sensor Replacement: paso 3, imagen 3 de 3

Separate the two covers.
Put aside the white sheets.
Do not put the white sheets on any surface. Only keep them in the covers.
Use the tweezers to remove the sting glue and separate the glue from the sensor.