Repara tus cosas Comunidad Tienda

SuperTooth Buddy Battery replacement

Introducción

Replacing the battery in the SuperTooth buddy hands-free system.

Qué necesitas

  1. SuperTooth Buddy Battery replacement, Rechargeable batteries: paso 1, imagen 1 de 1

    • Carefully lift off the glued on cover.

    Traducir

  2. SuperTooth Buddy Battery replacement: paso 2, imagen 1 de 1

    • Remove the two screws on the right.

    • There is also a small screw to the left of the green button

    Traducir

  4. SuperTooth Buddy Battery replacement: paso 3, imagen 1 de 1

    • There are also two screws on the back that need to be removed

    Traducir

  5. SuperTooth Buddy Battery replacement: paso 4, imagen 1 de 1

    • Be careful when lifting off the cover so as not to damage the two thin speaker cables.

    • Carefully remove the two screws holding the circuit board in place.

    • The battery is located under the circuit board

    Traducir

  6. SuperTooth Buddy Battery replacement: paso 5, imagen 1 de 1

    • Order a replacement battery online.

    • Li-ION 3.7V 650mAh 2.41 Wh

    • Make sure that the new battery has the same dimensions as the old one. (In this case it was approx. 50mm x 30mm x 4mm.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

de en

100%

oldturkey03

¡ oldturkey03 nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Autor

con 2 otros colaboradores

markus1980wien

Miembro Desde 09/27/15

111 Reputación

1 Guía escrita

Insignias: 4

+1 mas insignia

Un comentario

Ottime istruzioni per lo smontaggio. Grazie. Fino ad ora non ho trovato la batteria sostitutiva su internet. Spero di trovarla.

Eva Verlicchi - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 16

Ultimos 30 días: 69

Todo El Tiempo: 3,378