Repara tus cosas Comunidad Tienda

SuperSonic Matrix Mid SC-999 Back Cover Replacement

Introducción

This guide will simply show you how to remove the back cover of the device. Very minimal effort is required to achieve this task.

Qué necesitas

  1. SuperSonic Matrix Mid SC-999 Back Cover Replacement, Back Cover: paso 1, imagen 1 de 1

    • Wedge the plastic opening tool between the back cover of the device and the front panel.

    • You will hear a snapping sound as the cover is separated from the body of the device.

    Editar

  3. SuperSonic Matrix Mid SC-999 Back Cover Replacement: paso 2, imagen 1 de 1

    • Slide the opening tool along the seam between the front panel and the back cover to un-clip the remaining connections around the device.

    • Again, you will hear a snapping sound as the cover is separated from the body of the device.

    Editar

  4. SuperSonic Matrix Mid SC-999 Back Cover Replacement: paso 3, imagen 1 de 2 SuperSonic Matrix Mid SC-999 Back Cover Replacement: paso 3, imagen 2 de 2

    • Lift the back cover from the body of the device to expose the internal components.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Harris Dagha

Miembro Desde 03/26/15

866 Reputación

7 Guías creadas

Insignias: 15

+ 12 más insignias

Equipo

Dr Shaverz boyz Miembro de Dr Shaverz boyz

Community

3 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 4

Todo El Tiempo: 421