Saltar al contenido principal

Introducción

This guide will show you how to open up your Super Nintendo.

Partes

No se especificaron partes.

  1. Remove the six screws located on the underside of the system using the Gamebit 4.5mm screwdriver.
    • Remove the six screws located on the underside of the system using the Gamebit 4.5mm screwdriver.

  2. Carefully flip the unit back over. Locate the seam. Lift and separate the upper half of the case from the lower half of the case. Locate the seam. Lift and separate the upper half of the case from the lower half of the case.
    • Carefully flip the unit back over.

    • Locate the seam. Lift and separate the upper half of the case from the lower half of the case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

12 personas más completaron esta guía.

Equipo

Cal Poly, Team 4-47, Amido Fall 2010 Miembro de Cal Poly, Team 4-47, Amido Fall 2010

CPSU-AMIDO-F10S4G47

4 Miembros

10 Guías creadas

Hi, my name is Orlando, I'm writting of Perú, I have a question:

I can´t put the hinge of the top of that above part.

Please, can you help me, my mail is orla.davila12@gmail.com

Orlando Dávila Vizconde - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 15

Últimos 30 Días: 99

Todo El Tiempo: 19,997