Repara tus cosas Comunidad Tienda

SteelSeries Apex 64145 LED Replacement

Introducción

You will be removing the back of the keyboard in order to replace broken LED lights. This is to ensure the keys from lighting up as this is one of the key attraction of the SteelSeries keyboard.

Qué necesitas

  1. SteelSeries Apex 64145 LED Replacement, Gel Membrane: paso 1, imagen 1 de 1

    • Unplug the keyboard from the computer.

    Editar

  2. SteelSeries Apex 64145 LED Replacement: paso 2, imagen 1 de 1

    • Unscrew the twenty black 4.5 mm Phillips #1 screws on the back of the keyboard.

    Editar

  3. SteelSeries Apex 64145 LED Replacement: paso 3, imagen 1 de 1

    • Pry open the back of the keyboard.

    Editar

  4. SteelSeries Apex 64145 LED Replacement: paso 4, imagen 1 de 2 SteelSeries Apex 64145 LED Replacement: paso 4, imagen 2 de 2

    • Remove the gel membrane.

    Editar

  6. SteelSeries Apex 64145 LED Replacement, LED: paso 5, imagen 1 de 2 SteelSeries Apex 64145 LED Replacement, LED: paso 5, imagen 2 de 2

    • Unscrew the two silver 4.0 mm Phillips #1 screws and the three black 6.5 mm Phillips #1 screws holding the silicone sheets.

    Editar

  7. SteelSeries Apex 64145 LED Replacement: paso 6, imagen 1 de 1

    • Flip the chip slightly in order to remove the sheets.

    Editar

  8. SteelSeries Apex 64145 LED Replacement: paso 7, imagen 1 de 1

    • Remove the sheets.

    Editar

  9. SteelSeries Apex 64145 LED Replacement: paso 8, imagen 1 de 2 SteelSeries Apex 64145 LED Replacement: paso 8, imagen 2 de 2

    • Unscrew the two silver 4.5 mm Phillips #1 screws and the seven 5.0 mm Phillips #1 screws that deter the plastic panel from removal.

    Editar

  10. SteelSeries Apex 64145 LED Replacement: paso 9, imagen 1 de 1

    • Remove the plastic panel and the white sheet.

    Editar

  11. SteelSeries Apex 64145 LED Replacement: paso 10, imagen 1 de 3 SteelSeries Apex 64145 LED Replacement: paso 10, imagen 2 de 3 SteelSeries Apex 64145 LED Replacement: paso 10, imagen 3 de 3

    • Unplug the wires connected to the LEDs.

    Editar

  12. SteelSeries Apex 64145 LED Replacement: paso 11, imagen 1 de 2 SteelSeries Apex 64145 LED Replacement: paso 11, imagen 2 de 2

    • Remove the LEDs.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Zwe Phone Shein

Miembro Desde 02/28/17

559 Reputación

5 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

USF Tampa, Team S1-G1, Nance Spring 2017 Miembro de USF Tampa, Team S1-G1, Nance Spring 2017

USFT-NANCE-S17S1G1

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 6

Ultimos 7 días: 36

Ultimos 30 días: 137

Todo El Tiempo: 13,732