Repara tus cosas Comunidad Tienda

SteelSeries Apex 3 TKL Rubber Membrane Replacement

Introducción

Here is a guide on how to replace or realign a rubber membrane in a SteelSeries Apex 3 TKL. This guide will be helpful if some of your keys are not working and they are starting to stick. Making sure the rubber membrane is perfectly aligned to the back of the keys could be a solution to your problem.

Qué necesitas

  1. SteelSeries Apex 3 TKL Rubber Membrane Replacement, Back Panel: paso 1, imagen 1 de 1

    • Use a JIS #00 screwdriver to remove all back panel screws.

    Traducir

  3. SteelSeries Apex 3 TKL Rubber Membrane Replacement: paso 2, imagen 1 de 2 SteelSeries Apex 3 TKL Rubber Membrane Replacement: paso 2, imagen 2 de 2

    • Use the iFixit opening pick to pry open the back panel by running it along the edges of the keyboard.

    Traducir

  4. SteelSeries Apex 3 TKL Rubber Membrane Replacement, Rubber Membrane: paso 3, imagen 1 de 1

    • Lift off the rubber membrane.

    • When replacing, make sure the back stubs align with the back of each key on the keyboard.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Tyler Pepe

Miembro Desde 03/20/24

169 Reputación

2 Guías creadas

Insignias: 2

Equipo

UMass Dartmouth, Team 1-3, Santin Spring 2024 Miembro de UMass Dartmouth, Team 1-3, Santin Spring 2024

UMASSD-SANTIN-S24S1G3

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 6

Todo El Tiempo: 15