Repara tus cosas Comunidad Tienda

SteelSeries Apex 3 TKL Keys Replacement

Introducción

In this guide you will learn to take apart the keyboard to gain access to debris under the keys that could be causing sticky keys.

Qué necesitas

  1. SteelSeries Apex 3 TKL Keys Replacement, Back Panel: paso 1, imagen 1 de 1

    • Use a JIS #00 screwdriver to remove all back panel screws.

    Editar

  2. SteelSeries Apex 3 TKL Keys Replacement: paso 2, imagen 1 de 2 SteelSeries Apex 3 TKL Keys Replacement: paso 2, imagen 2 de 2

    • Use the iFixit opening pick to pry open the back panel by running it along the edges of the keyboard.

    Editar

  4. SteelSeries Apex 3 TKL Keys Replacement, Rubber Membrane: paso 3, imagen 1 de 1

    • Lift off the rubber membrane.

    • When replacing, make sure the back stubs align with the back of each key on the keyboard.

    Editar

  5. SteelSeries Apex 3 TKL Keys Replacement, Keys: paso 4, imagen 1 de 1

    • Use a screwdriver to remove the screws securing the plastic backing on the keys.

    Editar

  6. SteelSeries Apex 3 TKL Keys Replacement: paso 5, imagen 1 de 1

    • You can use the spudger to press out specific keys that are dirty or for key cap replacement

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Nicholas Medeiros

Miembro Desde 03/20/24

253 Reputación

3 Guías creadas

Insignias: 3

Equipo

UMass Dartmouth, Team 1-3, Santin Spring 2024 Miembro de UMass Dartmouth, Team 1-3, Santin Spring 2024

UMASSD-SANTIN-S24S1G3

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 12

Ultimos 30 días: 68

Todo El Tiempo: 124