Saltar al contenido principal

Steam Link Disassembly

Qué necesitas

  1. Steam Link Disassembly, Starting up: paso 1, imagen 1 de 2 Steam Link Disassembly, Starting up: paso 1, imagen 2 de 2
    • Start by unplugging your device

    • Power cord

    • Ethernet

    • HDMI

  2. Steam Link Disassembly, Removing the rubber bottom: paso 2, imagen 1 de 2 Steam Link Disassembly, Removing the rubber bottom: paso 2, imagen 2 de 2
    • Start by removing the rubber bottom using the Guitar Pick or the Jimmy

    • The first time, the adhesive may be difficult to remove

  3. Steam Link Disassembly, Removing the screws: paso 3, imagen 1 de 2 Steam Link Disassembly, Removing the screws: paso 3, imagen 2 de 2
    • Remove the screws using a Torxx 6 bit

  4. Steam Link Disassembly, Opening the lid: paso 4, imagen 1 de 2 Steam Link Disassembly, Opening the lid: paso 4, imagen 2 de 2
    • Open-up the bottom lid using guitar pics

    • The first time you open it, it might be difficult to open. Start by reaching the rounded, bottom-right corner

  5. Steam Link Disassembly, Main board inspection: paso 5, imagen 1 de 2 Steam Link Disassembly, Main board inspection: paso 5, imagen 2 de 2
    • Marvel ArmV7 CPU

    • Vivante GC1000 GPU

Conclusión

To reassemble your device, follow the steps in the opposite order

8 personas más completaron esta guía.

4 comentarios

bonjour esque cette carte peu servire comme raspberry merci

thesmoking gta - Contestar

Non, seule une image signée par Valve peut être lancée. Elle a un accès SSH comme indiqué sur la page du SDK cependant. Notez qu'elle n'est plus fabriquée depuis décembre, donc elle n'est plus vraiment disponible.

Jorys Paulin (Jorys_Paulin) -

Somewhat unworthy Teardown. Naming the CPU brand wrong and not giving any relevant information like schematics or ICs used. THIS is by far better: https://www.allaboutcircuits.com/news/te...

EDIT: Oh, it is a community post, sry. But more information would be nice. E.g. where is the massive heat sink? There are lots of parts missing.

Jan Seewald - Contestar

Hello, this is my first (and only) teardown. I made it just for fun, really. I opened my Steam Link once and then decided to put it on the internet, because I found they weren’t that much photos of it around.

The heat sink is a large piece of aluminum, and now I realize I forgot to add it, my mistake.

Jorys Paulin (Jorys_Paulin) -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 11

Ultimos 30 días: 73

Todo El Tiempo: 4,733