Introducción
The steam wand is used to steam and froth milk as well as dispense hot water for Americanos or tea.
Qué necesitas
-
-
Using a wrench, unscrew the hex nut and remove the steam wand.
-
Note: Do not lose the hex nut once it is unscrewed.
-
-
-
-
Using a thin tool or item, such as a paper clip, poke around through the holes on both ends of the wand to remove any foreign material.
-
Place the steam wand in a de-calcifying solution as directed by product.
-
Reconnect the steam wand.
-
See the links section of the device page to purchase a new steam wand.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
4 personas más completaron esta guía.
Equipo
Cal Poly, Team 4-42, Regan Winter 2011 Miembro de Cal Poly, Team 4-42, Regan Winter 2011
CPSU-REGAN-W11S4G42
4 Miembros
5 Guías creadas
2 comentarios
To replace steam-wand seals (in case of water leaking out from the center of the steam-wand): https://www.youtube.com/watch?v=fulyy9A9... , but note - for parts: https://philips.encompass.com/model/SAER... (worth going to amazon.de and entering the partnumbers into the search box: e.g. the o-rings for the needle-valve (996530013462)
