Saltar al contenido principal

Qué necesitas

  1. Starbucks Barista Steam Wand replacement or cleaning, steam wand: paso 1, imagen 1 de 1
    • Using a wrench, unscrew the hex nut and remove the steam wand.

    • Note: Do not lose the hex nut once it is unscrewed.

  2. Starbucks Barista Steam Wand replacement or cleaning: paso 2, imagen 1 de 2 Starbucks Barista Steam Wand replacement or cleaning: paso 2, imagen 2 de 2
    • Using a thin tool or item, such as a paper clip, poke around through the holes on both ends of the wand to remove any foreign material.

    • Place the steam wand in a de-calcifying solution as directed by product.

    • Reconnect the steam wand.

    • See the links section of the device page to purchase a new steam wand.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

David

Miembro Desde 28/01/11

724 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 4-42, Regan Winter 2011 Miembro de Cal Poly, Team 4-42, Regan Winter 2011

CPSU-REGAN-W11S4G42

4 Miembros

5 Guías creadas

Un comentario

To replace steam-wand seals (in case of water leaking out from the center of the steam-wand): https://www.youtube.com/watch?v=fulyy9A9... , but note - for parts: https://philips.encompass.com/model/SAER... (worth going to amazon.de and entering the partnumbers into the search box: e.g. the o-rings for the needle-valve (996530013462)

R Cly - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 15

Ultimos 30 días: 56

Todo El Tiempo: 15,297