Saltar al contenido principal

Partes

No se especificaron partes.

  1. Este paso está sin traducir. Ayuda a traducirlo

    Unscrew the 6 screws from the back panel. Remove the back panel.
    • Unscrew the 6 screws from the back panel.

    • Remove the back panel.

  2. Este paso está sin traducir. Ayuda a traducirlo

    Locate the ready light. Gently push the fixture against the Barista wall. Pull the fixture straight up to release it.
    • Locate the ready light.

    • Gently push the fixture against the Barista wall.

    • Pull the fixture straight up to release it.

    • Note: The fixture works as a spring.

    • Note: The green cover from the front panel will "pop" off. Do not lose the green cover.

    • Disconnect the wire lead connectors.

    • Remove the ready light unit (fixture).

  3. Este paso está sin traducir. Ayuda a traducirlo

    Replace the old LED with a new LED.
    • Replace the old LED with a new LED.

    • To put back, match the green cover to the slot of the LED fixture, then slide the fixture down against the barista wall.

Linea de Meta

Una persona más ha completado esta guía.

David

Miembro Desde 28/01/11

706 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 4-42, Regan Winter 2011 Miembro de Cal Poly, Team 4-42, Regan Winter 2011

CPSU-REGAN-W11S4G42

4 Miembros

5 Guías creadas

4 comentarios

Youth and sports for

Rich Ridout - Contestar

Where can I get a new LED bulb?

Paula - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 11

Todo El Tiempo: 5,703