Introducción
If your pencils are not properly sharpening, the problem could be a dull or worn cutter. This guide will show you how to replace the cutter component of your Staples 34462 Electric Pencil Sharpener.
Qué necesitas
-
-
-
Orient the top panel so that the sensor bracket is facing you.
-
Using a Phillips00 screwdriver, remove four 10.42mm screws.
-
Using a Phillips00 screwdriver, remove two 6.96mm screws.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
4 comentarios
where can I get a replacement cutter?
Did you find replacement blades?