Qué necesitas
-
-
Con este tutorial vamos a limpiar las ruedas y actualizar el droide para que podamos limpiar las ruedas nuevamente en el futuro.
-
-
-
La cabeza se mantiene en su lugar mediante imanes. Las ruedas están ubicadas dentro del cabezal y recogen todo tipo de suciedad por lo que con el tiempo las ruedas se van atascando por toda la suciedad y BB-8 no responde como cuando era nuevo.
-
Pensé que podría sacar la parte inferior pero eso no es posible.
-
-
-
Utiliza una herramienta de apertura de plástico para abrir la cabeza. Se utiliza algo de pegamento, así que ten cuidado de no utilizar demasiada fuerza.
-
La parte más difícil es romper el pegamento. Una vez realizado este paso, la cabeza será mucho más fácil de desmontar en el futuro.
-
-
-
-
Vuelve a colocar la base de la cabeza en el cuerpo, esto mantendrá los imanes en su lugar.
-
-
-
Corta los remaches de plástico con una cuchilla afilada. Asegúrate de no soltar nada del plástico blanco porque se volverá a utilizar como arandela.
-
Cuando sueltes o rompas una (como yo), te mostraré cómo hacer una nueva lavadora más adelante.
-
-
-
usa un perforador y una tarjeta bancaria o SIM vieja para cortar una arandela de plástico.
-
Haz un agujero con un destornillador pequeño.
-
Un agradecimiento especial a estos traductores:
100%
¡ Francisco Javier Saiz Esteban nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
6 comentarios
The simplist way to clean the wheels is to take a Q-Tip, dip in alcohol and clean the wheels by rotating them. I know it's not as fun as taking the head apart but...
But you can’t get the dust and hair wrapped around the axle with just a qtip and alcohol
If you want the head to stay on better, super glue some small & thin magnets to the bottom of the head. I did this and it works so well you can lift BB-8 up by his head. It also doesn't impead his speed or functionality. I also put a small piece of tape over the magnets to keep from scratching the body.
Awesome idea, could you let me know what brand/size magnet you used and what tape to recommend?
Thanks for this teardown. Now I can clean BB-8 head in case needed.