Introducción

Make sure you can explore the Xplod very well.

  1. Press down the release button on the bottom left corner of the face plate.
    • Press down the release button on the bottom left corner of the face plate.

    • Then remove the face plate carefully.

    Agregar Comentario

  2. Agregar Comentario

    • Using the Phillips #1 Screwdriver, unscrew the 2 thick screws (length - 7.69mm) located on both sides of the stereo.

    • Remove side-metal plates gently.

    • Use the Heavy-duty Spudger, insert the flat end under each of the black flaps indicated in the picture. Use leverage to pry and pop them loose.

    Agregar Comentario

    • Remove the black front plate of the stereo.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Using the Phillips #0 Screwdriver, unscrew the 1 gold screw (height - 7.47mm) on the top of the stereo.

    • Lift off the top plate.

    Agregar Comentario

    • Using the Phillips #0 Screwdriver, unscrew the 8 gold screws (length - 9.26mm), located on the back side of the stereo.

    • Using the Phillips #0 Screwdriver, unscrew the 2 black screws (length - 13.27mm), also located on the back of the stereo.

    • Using the Phillips #0 Screwdriver, unscrew the 1 gold screw (length - 9.3mm), located on the bottom of a hole as noted in pictures (2) and (3).

    Agregar Comentario

    • Carefully pull the fuse out of the back of the stereo.

    Agregar Comentario

    • Firmly grip the body of the stereo and pull off the silver back plate.

    Agregar Comentario

  4. Agregar Comentario

    • Using the Phillips #0 Screwdriver, unscrew the 2 gold screws (length - 7.34mm) found on both sides of the stereo.

    Agregar Comentario

    • Grip the top portion of the stereo, where the CD-Drive is located, and gently pull up to release it, but you will not be able to lift it all the way out.

    • Grab the two tabs located near the back of the stereo, and gently pull the CD-drive front the rest of the device.

    Agregar Comentario

  5. Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Chao Chen

Miembro Desde 04/10/11

79 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 5-35, Amido Fall 2011 Miembro de Cal Poly, Team 5-35, Amido Fall 2011

CPSU-AMIDO-F11S5G35

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 12

Últimos 30 Días: 42

Todo El Tiempo: 5,771