Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Heat the back cover to soften the adhesive sticker.
-
Place the suction cup and inert metal opening tool to open a gap from top side.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the guitar pick and slide it to cut the adhesive sticker underneath.
-
Remove back cover.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Release battery connector in order to prevent short circuit.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Release audio jack flex connector and twist off the Phillips screws underneath.
-
Remove the plastic bracket securing the front camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Release front camera connector and remove front camera.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.