Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Introducción

This is the replacement guide for Sony Xperia Z3 Dual as well as Sony Xperia Z3 front camera.

  1. Power off the phone and remove two SIM card trays before replacement.
    • Power off the phone and remove two SIM card trays before replacement.

  2. Heat to soften back cover adhesive sticker. Use suction cup to open a gap and insert into the guitar pick. Slide the guitar pick to cut the sticker. Use suction cup to open a gap and insert into the guitar pick. Slide the guitar pick to cut the sticker.
    • Heat to soften back cover adhesive sticker.

    • Use suction cup to open a gap and insert into the guitar pick. Slide the guitar pick to cut the sticker.

  3. Remove back cover carefully and avoid cracking the glass.
    • Remove back cover carefully and avoid cracking the glass.

  4. Kit de Destornilladores Manta

    112 bits for every fix.

    Upgrade Your Toolbox

    Kit de Destornilladores Manta

    Upgrade Your Toolbox
  5. Remove battery or not is optional. Remove it makes the replacement convenient while keep it also will not block the replacement. Remove battery or not is optional. Remove it makes the replacement convenient while keep it also will not block the replacement. Remove battery or not is optional. Remove it makes the replacement convenient while keep it also will not block the replacement.
    • Remove battery or not is optional. Remove it makes the replacement convenient while keep it also will not block the replacement.

  6. Remove screws at first.
    • Remove screws at first.

  7. Remove three pieces of securing bracket. Remove three pieces of securing bracket. Remove three pieces of securing bracket.
    • Remove three pieces of securing bracket.

  8. Release all the connectors connecting with motherboard. Pry the motherboard up from left side and remove it. The motherboard is hold tightly by some hidden keys, so you should be very careful. Pry the motherboard up from left side and remove it. The motherboard is hold tightly by some hidden keys, so you should be very careful.
    • Release all the connectors connecting with motherboard.

    • Pry the motherboard up from left side and remove it. The motherboard is hold tightly by some hidden keys, so you should be very careful.

  9. Release the connector and pull out the flex at first, please be careful as you can. Remove the front camera finally.
    • Release the connector and pull out the flex at first, please be careful as you can.

    • Remove the front camera finally.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Sophia

Miembro Desde 25/03/14

42,746 Reputación

62 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 2,191