Saltar al contenido principal

Sony Xperia M4 Aqua Back Cover

Qué necesitas

  1. Sony Xperia M4 Aqua Back Cover, Back Cover: paso 1, imagen 1 de 1
    • Place the phone face-down, and use a heat gun or hair dryer to evenly heat the back surface until to soften the adhesive.

  2. Sony Xperia M4 Aqua Back Cover: paso 2, imagen 1 de 1
    • Attach a suction cup to the back of the M4 Aqua by carefully pushing down on it near the top of the phone.

  3. Sony Xperia M4 Aqua Back Cover: paso 3, imagen 1 de 2 Sony Xperia M4 Aqua Back Cover: paso 3, imagen 2 de 2
    • While Pulling on the suction cup, slide a thin plastic spacer (guitar picks work well) between the back cover and the phone. Slide it around the edges to break the adhesive seal. Be careful, but don't be afraid to use some force. You should hear a sticky breaking sound.

  4. Sony Xperia M4 Aqua Back Cover: paso 4, imagen 1 de 1
    • Remove the back cover by pulling it from the chassis. it is flexible and can be bent, be careful.

Conclusión

To reassemble your device, follow these instructions in reverse order.

17 personas más completaron esta guía.

Brian McKalip

Miembro Desde 02/10/16

2,100 Reputación

2 Guías creadas

Equipo

USF Tampa, Team 4-5, Lacy Spring 2016 Miembro de USF Tampa, Team 4-5, Lacy Spring 2016

USFT-LACY-S16S4G5

3 Miembros

8 Guías creadas

3 comentarios

Thanks. Do you know where to order a new back cover? Mine has shattered

Michael McNicholas - Contestar

Das ist kein Xperia Z3

Das ist eine Anleitung vom M4 Aqua

Faruk - Contestar

Reassembling just in reverse order you’ll  get a non-dust and non-waterproof device and not normally fixed rear cover.  You have to apply special Sony Xperia M4 Aqua E2303 Adhesive Sticker, 56BTUL0030A.

Andrey - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 4

Todo El Tiempo: 8,186