Repara tus cosas Comunidad Tienda

Sony Xperia L2 LTE Charging Port Replacement

Introducción

This guide will take you step by step through the process of replacing your Sony Xperia L2 charging port. This guide will with an inoperable or faulty charging port to extend battery life.

Qué necesitas

  1. Sony Xperia L2 LTE Charging Port Replacement, Battery: paso 1, imagen 1 de 2 Sony Xperia L2 LTE Charging Port Replacement, Battery: paso 1, imagen 2 de 2

    • Before disassembling the battery, power off your Sony Xperia L2 LTE.

    • Remove SIM card tray.

    Traducir

  2. Sony Xperia L2 LTE Charging Port Replacement: paso 2, imagen 1 de 3 Sony Xperia L2 LTE Charging Port Replacement: paso 2, imagen 2 de 3 Sony Xperia L2 LTE Charging Port Replacement: paso 2, imagen 3 de 3

    • Use the plastic opening tool to pry the back case of the phone off.

    • The fingerprint sensor is connected to the motherboard.

    • Disconnect the fingerprint sensor.

    Traducir

  4. Sony Xperia L2 LTE Charging Port Replacement: paso 3, imagen 1 de 1

    • Unscrew all 10 screws from the top and bottom portion of the phone using a T4 Torx screwdriver.

    • Use the plastic opening tool to remove the unscrewed top and bottom portion of the phone.

    Traducir

  5. Sony Xperia L2 LTE Charging Port Replacement: paso 4, imagen 1 de 2 Sony Xperia L2 LTE Charging Port Replacement: paso 4, imagen 2 de 2

    • Disconnect the battery cable from the motherboard.

    • Pry up the battery and remove it from the device.

    • Battery may have adhesive that needs to be removed prior to removing the battery.

    • Be careful not to jab the battery with any sharp tools. A punctured battery may leak dangerous chemicals or catch fire.

    Traducir

  6. Sony Xperia L2 LTE Charging Port Replacement, Charging Port: paso 5, imagen 1 de 2 Sony Xperia L2 LTE Charging Port Replacement, Charging Port: paso 5, imagen 2 de 2

    • Use a plastic opening tool to lift the charging port circuit board.

    Traducir

  7. Sony Xperia L2 LTE Charging Port Replacement: paso 6, imagen 1 de 1

    • Unhook the antenna from circuit board using a plastic opening tool and remove the charging port circuit board from the device.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 4

Todo El Tiempo: 621