Repara tus cosas Comunidad Tienda

Sony Walkman NWZ-E438 Screen Replacement

Introducción

Follow this guide to replace a cracked or broken screen on you Sony Walkman NWZ-E438.

Qué necesitas

  1. Sony Walkman NWZ-E438 Screen Replacement, Disassembling Sony Walkman NWZ-E438: paso 1, imagen 1 de 1

    • Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.

    • Keep the Phillips PH000 screwdriver aside for further steps in the guide. It will be the only screwdriver needed for this replacement.

    Traducir

  2. Sony Walkman NWZ-E438 Screen Replacement: paso 2, imagen 1 de 1

    • Use a small prying tool to carefully pry open the back of the device.

    Traducir

  3. Sony Walkman NWZ-E438 Screen Replacement, Screen: paso 3, imagen 1 de 1

    • Pull up the 2 copper strips connecting the outside of the device to the inside of the device.

    Traducir

  5. Sony Walkman NWZ-E438 Screen Replacement: paso 4, imagen 1 de 1

    • Using the small, plastic prying tool wedge it between the bottom of the frame and the outer frame.

    • Slowly circle the device, popping the outside of the frame off.

    Traducir

  6. Sony Walkman NWZ-E438 Screen Replacement: paso 5, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • To remove the screen, use the fine point tweezers and lift up on the metal piece at the bottom of the frame.

    Traducir

  7. Sony Walkman NWZ-E438 Screen Replacement: paso 6, imagen 1 de 1

    • To remove screen from metal backing, use fine point tweezers to go in between the screen and metal backing and slowly pull them apart.

    Traducir

  8. Sony Walkman NWZ-E438 Screen Replacement: paso 7, imagen 1 de 1

    • The screen will be removed.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 13

Todo El Tiempo: 685