Saltar al contenido principal

Sony Vaio VGN-Z48GD SSDs Replacement

Qué necesitas

  1. Sony Vaio VGN-Z48GD SSDs Replacement, SSDs: paso 1, imagen 1 de 1
    • Power off your laptop before starting.

    • Disconnect all external cables from the device.

  2. Sony Vaio VGN-Z48GD SSDs Replacement: paso 2, imagen 1 de 1
    • Flip the device over so that the battery is facing away from you.

    • Unlock the battery by using your finger to push the "Lock" latch to the right.

    • You will hear a soft click when the latch has been disengaged.

  3. Sony Vaio VGN-Z48GD SSDs Replacement: paso 3, imagen 1 de 1
    • Place your finger on the "Release" latch.

    • Slide the latch to the right and hold it.

    • Use your other hand to lift the battery from the groove.

    • Remove the battery.

  4. Sony Vaio VGN-Z48GD SSDs Replacement: paso 4, imagen 1 de 1
    • Remove a 5 mm Phillips #000 screw from the RAM cover located in the centre of the device.

    • Remove the RAM cover.

    • There is no need to remove the RAMs as they won't get in the way.

  5. Sony Vaio VGN-Z48GD SSDs Replacement: paso 5, imagen 1 de 2 Sony Vaio VGN-Z48GD SSDs Replacement: paso 5, imagen 2 de 2
    • Remove the following eleven screws:

    • Five 13 mm Phillips #000 screws

    • Six 5 mm Phillips #000 screws

  6. Sony Vaio VGN-Z48GD SSDs Replacement: paso 6, imagen 1 de 1
    • Flip the device and open the lid so that the keyboard is facing upwards.

    • Use an opening tool to lift the keyboard assembly slightly.

    • Make sure you don't lift the keyboard assembly too much as there is a ribbon cable in between.

  7. Sony Vaio VGN-Z48GD SSDs Replacement: paso 7, imagen 1 de 1
    • Flip the keyboard assembly towards you.

  8. Sony Vaio VGN-Z48GD SSDs Replacement: paso 8, imagen 1 de 1
    • Use an opening tool to pry the keyboard assembly connector up from its socket on the motherboard.

    • Remove the keyboard assembly.

  9. Sony Vaio VGN-Z48GD SSDs Replacement: paso 9, imagen 1 de 1
    • Use an opening tool to pry the uSATA ribbon cable connector up from its socket on the motherboard.

  10. Sony Vaio VGN-Z48GD SSDs Replacement: paso 10, imagen 1 de 2 Sony Vaio VGN-Z48GD SSDs Replacement: paso 10, imagen 2 de 2
    • Remove two 13 mm screws from the SSD bracket using a Phillips #000 screwdriver.

    • Remove the SSD bracket.

  11. Sony Vaio VGN-Z48GD SSDs Replacement: paso 11, imagen 1 de 1
    • Flip the SSD bracket.

    • Use your hand to disconnect the uSATA connector on the right.

  12. Sony Vaio VGN-Z48GD SSDs Replacement: paso 12, imagen 1 de 1
    • Flip the SSD bracket.

    • Use your hand to disconnect the uSATA connector on the left.

    • Remove the uSATA ribbon cable.

  13. Sony Vaio VGN-Z48GD SSDs Replacement: paso 13, imagen 1 de 1
    • Remove two 2 mm Phillips #00 screws.

  14. Sony Vaio VGN-Z48GD SSDs Replacement: paso 14, imagen 1 de 1
    • Flip the SSD bracket.

    • Remove two 2 mm Phillips #00 screws.

  15. Sony Vaio VGN-Z48GD SSDs Replacement: paso 15, imagen 1 de 1
    • Take out the SSDs from the bracket.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Vincent L

Miembro Desde 01/10/19

265 Reputación

1 Guía escrita

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 9

Ultimos 30 días: 32

Todo El Tiempo: 822