Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the eleven 6 mm screws from the back panel on the bottom of laptop with the Phillips #0 screwdriver.
-
Unscrew the one 4 mm screw from the back panel on the bottom of laptop with the Phillips #0 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a plastic opening tool, pull the optical drive out of the computer by the seam.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the clip marked in red in order to release the back cover.
-
Lift the back cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the three 4mm screws with the Phillips #0 screwdriver located on the outer edge of the hard drive.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift hard drive up from it groundings.
-
Slide hard drive to the left in order to remove it.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.