Introducción

The RAM in the Sony Vaio SVF15A16CXB temporarily stores data.

Partes

No se requieren partes.

  1. Unscrew the eleven 6 mm screws from the back panel on the bottom of laptop with the Phillips #0 screwdriver.
    • Unscrew the eleven 6 mm screws from the back panel on the bottom of laptop with the Phillips #0 screwdriver.

    • Unscrew the one 4 mm screw from the back panel on the bottom of laptop with the Phillips #0 screwdriver.

    • 6 mm screws marked in red, 4 mm marked in orange

  2. Using a plastic opening tool, pull the optical drive out of the computer by the seam.
    • Using a plastic opening tool, pull the optical drive out of the computer by the seam.

    • In reassembly, slide the optical drive back in after reapplying cover.

    • Run the opening tool along the bottom cover seam.

    • Lift the clip marked in red in order to release the back cover.

    • Lift the back cover.

    • Locate the two metal clips securing the RAM.

    • Pull apart the two metal clips with your fingers.

    • Once you pull the metal clips away, the RAM will spring up from its original position.

    • Pull the RAM out of the laptop.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Irven Coulter

Miembro Desde 04/10/18

231 Reputación

2 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 29

Todo El Tiempo: 36