Saltar al contenido principal
  1. Este paso está sin traducir. Ayuda a traducirlo

    The battery is located on the left side of the laptop as shown by the red circle.
    • The battery is located on the left side of the laptop as shown by the red circle.

  2. Este paso está sin traducir. Ayuda a traducirlo

    Pull the plastic cover down (indicated by the arrow on the cover) and then swing it upwards to reveal the battery compartment.
    • Pull the plastic cover down (indicated by the arrow on the cover) and then swing it upwards to reveal the battery compartment.

    • The battery can now be removed by pulling it.

  3. Este paso está sin traducir. Ayuda a traducirlo

    Use your Philips #00 screwdriver to unscrew the small screw counterclockwise.  This screw is for the audio/visual jacks on the left side of the laptop.
    • Use your Philips #00 screwdriver to unscrew the small screw counterclockwise. This screw is for the audio/visual jacks on the left side of the laptop.

  4. Este paso está sin traducir. Ayuda a traducirlo

    This will unlock the cover between the keyboard and screen. Gently slide it to the right and lift up.
    • This will unlock the cover between the keyboard and screen. Gently slide it to the right and lift up.

    • Do not lift or pull the cover excessively as there are wires connected to it.

    • Be sure not to pull the keyboard hard as there are still wires attached. These wires will be dealt with in the next step.

  5. Este paso está sin traducir. Ayuda a traducirlo

    Lift up the cover and lean it against the display so it is out of the way for the rest of the process.
    • Lift up the cover and lean it against the display so it is out of the way for the rest of the process.

    • Remove the small screw above the F6 key on the keyboard. Place screw in container to ensure it wont be lost.

  6. Este paso está sin traducir. Ayuda a traducirlo

    Find the green ribbon as indicated in the picture by the red circle.  This is what connects the keyboard to the motherboard.
    • Find the green ribbon as indicated in the picture by the red circle. This is what connects the keyboard to the motherboard.

  7. Este paso está sin traducir. Ayuda a traducirlo

    To unplug the ribbon cable, use a pair of tweezers to lift up the white bar near the connection to the motherboard. Only lift up the ribbon lightly to release ribbon from the motherboard.
    • To unplug the ribbon cable, use a pair of tweezers to lift up the white bar near the connection to the motherboard. Only lift up the ribbon lightly to release ribbon from the motherboard.

  8. Este paso está sin traducir. Ayuda a traducirlo

    Now, you can pull on the ribbon cable and it will detach from the motherboard. Now, you can pull on the ribbon cable and it will detach from the motherboard.
    • Now, you can pull on the ribbon cable and it will detach from the motherboard.

  9. Este paso está sin traducir. Ayuda a traducirlo

    Your keyboard is now safety detached.  Necessary repairs or replacements can be made from here.
    • Your keyboard is now safety detached. Necessary repairs or replacements can be made from here.

Linea de Meta

Una persona más ha completado esta guía.

Andrew Quayle

Miembro Desde 15/04/10

35 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 29-77, Johann Spring 2010 Miembro de Cal Poly, Team 29-77, Johann Spring 2010

CPSU-JOHANN-S10S29G77

5 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 2,350