Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Position the laptop screen-side down as shown.
-
In this position the battery housing will be located on the right hand side.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the panel up and then out to gain access to the battery.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
The battery is now removed and it is safe to move on to uninstalling other components.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
There are two screws on the left hand side of the laptop near the IR (Infared remote) receiver (see image). Remove them using a Phillips #00 Screwdriver.
-
Slide the speaker panel towards the left, then carefully flip it over onto the keyboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
On the inside of the speaker panel, using a spudger, push the beige tab in the direction of the ribbon. It should only move a small amount.
-
Remove the ribbon by gently pulling on it, there should be little or no resistance.
-
Now the speaker panel can be set aside.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the metal screw that will be located at the red circle.
-
Pull on the green strip, and the keyboard should come free easily.
-
Equipo
Cal Poly, Team 16-3, Maness Spring 2010 Miembro de Cal Poly, Team 16-3, Maness Spring 2010
CPSU-MANESS-S10S16G3
3 Miembros
8 Guías creadas
