Introducción

The PCG F360 comes with a floppy drive in an expansion bay. This can be replaced or swapped out for a battery or for a weight saver.

Herramientas

No se requieren herramientas.

Partes

No se requieren partes.

  1. Position the laptop screen-side down as shown.
    • Position the laptop screen-side down as shown.

    • In this position the battery housing will be located on the right hand side.

  2. Lift the panel up and then out to gain access to the battery.
    • Lift the panel up and then out to gain access to the battery.

    • Use the indentations to pull the old battery out.

    • The battery is now removed and it is safe to move on to uninstalling other components.

    • With one hand slide and hold the tab shown.

    • With your other hand, pull the floppy drive out of the floppy drive bay.

    • To replace the floppy drive, simply slide the drive into the slot until it clicks.

Conclusión

To reassemble your device, follow these instructions in reverse order.

ahintz

Miembro Desde 21/04/10

19 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 16-3, Maness Spring 2010 Miembro de Cal Poly, Team 16-3, Maness Spring 2010

CPSU-MANESS-S10S16G3

3 Miembros

8 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 2,655