Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Set the computer display-side down.
-
Unlock the battery by sliding the port-side latch to the 'unlock' position.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
On the opposite side of the battery, press the release latch and slide the battery away from the main body to remove.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the Torx security screw near the center of the battery-side edge.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Press the tabs on each side of the display-side of the keyboard with the flat edge of a spudger.
-
Pull the keyboard toward the mouse pad and gently lift up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the ribbon cable by pressing the tabs on either side of the connector. Pull the cable out parallel to the connector.
-
Remove the keyboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the laptop upside down.
-
Remove the three screws from the front mouse panel located on the bottom of the laptop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the mouse assembly just enough to access the connecting ribbon cable.
-
Lift the ribbon cable lock to remove the cable.
-
Carefully remove the mouse panel assembly and set aside.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.