1. Unscrew the screw holding the cover on with the appropriate Phillips screwdriver. This cover is located on the back of the computer.
    • Unscrew the screw holding the cover on with the appropriate Phillips screwdriver. This cover is located on the back of the computer.

  2. Lift the cover up and remove it with the computer. Remember to keep the cover and screw nearby so you can put them back on.
    • Lift the cover up and remove it with the computer. Remember to keep the cover and screw nearby so you can put them back on.

    • Identify the two RAM pieces.

    • Push out the two outer white catch pieces holding the both sides of the RAM in position. Begin gently removing the RAM from its position.

    • Once you have the RAM out on its own, replace it or put it back into the correct position.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 25

Todo El Tiempo: 41