Introducción

RAM replacement steps for a Sony VAIO SVE14AJ16L laptop.

Partes

No se requieren partes.

  1. Turn your laptop off before starting.
    • Turn your laptop off before starting.

    • Turn the laptop upside down onto the closed lid so that the bottom is facing you.

  2. Locate and remove the lone screw on the RAM cover with a Phillips #0 head screw driver. Carefully pry the RAM cover up.
    • Locate and remove the lone screw on the RAM cover with a Phillips #0 head screw driver.

    • Carefully pry the RAM cover up.

    • There will be some resistance, so use strength and not speed to remove the cover.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
    • With the cover removed, peel back the black protective plastic to expose one of the two RAM sticks.

    • Make sure not to touch any part of the blue board itself, and only handle the stick from it's edges.

    • Gently, but firmly push back the two side anchors that hold in the RAM using either an iFixit Opening Tool or your fingernails.

  4. Once both anchors are released from the RAM stick, the stick will spring up at an angle Finally, carefully pull the RAM stick away from the laptop at the same angle it is sitting at.
    • Once both anchors are released from the RAM stick, the stick will spring up at an angle

    • Finally, carefully pull the RAM stick away from the laptop at the same angle it is sitting at.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Dustin Smith

Miembro Desde 21/09/18

218 Reputación

2 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 6

Todo El Tiempo: 45