Repara tus cosas

Derecho a reparar

Partes y herramientas

Sony VAIO PCG-933A Keyboard Replacement

Escrito Por: Sara Lillard (y 4 de otros participantes)
  • Comentarios: 0
  • Favoritos: 0

Dificultad

Moderar

Pasos

7

Tiempo Requerido

15 minutos

Secciones

2

Banderas

1

Confusing Text

Texto confuso

Parte del texto de esta guía es confuso, duplicado o fuera de tema. Mejorala!

Introducción

This guide shows the repairing and replacing of the keyboard.

Herramientas

Comprar estas herramientas

Partes

No se especificaron partes.

  1. Turn the laptop upside down The battery is located on the front right side of the laptop; the opposite side from the floppy disk drive.

    • Turn the laptop upside down

    • The battery is located on the front right side of the laptop; the opposite side from the floppy disk drive.

    Traducir

  2. As shown by the arrow, slide the plastic cover up and then pull out and downwards. You should now be able to pull the battery out. You should now be able to pull the battery out.

    • As shown by the arrow, slide the plastic cover up and then pull out and downwards.

    • You should now be able to pull the battery out.

    Traducir

  3. Remove the four 16mm Phillips screws bordering the edge of the laptop, indicated here.

    • Remove the four 16mm Phillips screws bordering the edge of the laptop, indicated here.

    Traducir

  4. Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

    Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

  5. Remove the 4mm Phillips screw on the right rear side of the laptop next to the audio ports. This will release the speaker grille.

    • Remove the 4mm Phillips screw on the right rear side of the laptop next to the audio ports.

    • This will release the speaker grille.

    Traducir

  6. Flip the computer back over and open the screen.

    • Flip the computer back over and open the screen.

    Traducir

  7. Slide the blue speaker grille (located above the keyboard) to the right and gently pull upward. The grille will still be connected by a white electrical strip. Carefully pull out the white electrical strip. Carefully pull out the white electrical strip.

    • Slide the blue speaker grille (located above the keyboard) to the right and gently pull upward. The grille will still be connected by a white electrical strip.

    • Carefully pull out the white electrical strip.

    Traducir

  8. Remove the 4mm Phillips screw in the center (located to the left of the green strip). Carefully pull the green strip straight up to disconnect it. The keyboard can now be removed.

    • Remove the 4mm Phillips screw in the center (located to the left of the green strip).

    • Carefully pull the green strip straight up to disconnect it.

    • The keyboard can now be removed.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Sara Lillard

Miembro Desde 11/04/11

141 Reputación

8 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team 12-36, Maness Spring 2011 Miembro de Cal Poly, Team 12-36, Maness Spring 2011

CPSU-MANESS-S11S12G36

4 Miembros

8 Guías creadas

0 comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 1,576