Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the following color-coded screws:
-
These screws secure the RAM and hard drive covers, respectively.
-
These screws secure the optical drive to the lower case of the laptop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the following screws:
-
Five screws highlighted in orange.
-
Two screws highlighted in blue.
-
Pry the hard drive connector upwards from its socket on the logic board.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip up the retaining flap (highlighted in red) on the keyboard ribbon cable ZIF socket.
-
Pull the keyboard ribbon cable straight out of its socket toward the front edge of the laptop.
-
Cancelar: No complete esta guía.
7 personas más completaron esta guía.
3 comentarios
OMG... guys, you need just unscrew FOUR screws on the bottom (two orange circles on the same level that yellow sticker and two orange-circled screws in the middle of left and right side) and then pop the keyboard up with knife, etc, and disconnect the cable.
agree with Paul G. you don’t need to remove all the plastic case to change the keyboard
Pierret -