Qué necesitas
-
-
To remove the speaker grill, insert the big spudger underneath it in each corner.
-
-
-
Locate the four screws on the now exposed front panel.
-
-
-
-
Locate and remove the three black screws (10.0 mm) within the internal frame. Use bit T7.
-
-
-
Insert the spudger along the battery edge and firmly hold the wires. Lift both sides up. The battery will pop out from its encasement.
-
-
-
Locate two silver screws (9mm) attached to each speaker shield.
-
Remove the two silver screws on each speaker shield using the screwdriver with the PH1 head.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
3 personas más completaron esta guía.
2 comentarios
Are there any replacement drivers for this or the XB31?