Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Sony SRS-X55 Speaker Reverberator Replacement

Qué necesitas

  1. Sony SRS-X55 Speaker Reverberator Replacement, Speaker Reverberator: paso 1, imagen 1 de 1
    • Locate the six 9 mm screws on the bottom of the speaker and remove them using Phillips head #2.

  2. Sony SRS-X55 Speaker Reverberator Replacement: paso 2, imagen 1 de 2 Sony SRS-X55 Speaker Reverberator Replacement: paso 2, imagen 2 de 2
    • Insert a plastic spudger into the seam on the bottom panel and lift it away from the rest of the speaker.

  3. Sony SRS-X55 Speaker Reverberator Replacement: paso 3, imagen 1 de 3 Sony SRS-X55 Speaker Reverberator Replacement: paso 3, imagen 2 de 3 Sony SRS-X55 Speaker Reverberator Replacement: paso 3, imagen 3 de 3
    • Locate the battery connection and unplug it using a pair of metal tweezers.

  4. Sony SRS-X55 Speaker Reverberator Replacement: paso 4, imagen 1 de 2 Sony SRS-X55 Speaker Reverberator Replacement: paso 4, imagen 2 de 2
    • Locate the remaining two 3.5 mm screws on the bottom of the I/O board and remove them using a Phillips head #2 screwdriver.

  5. Sony SRS-X55 Speaker Reverberator Replacement: paso 5, imagen 1 de 1
    • Remove the I/O board from the rest of the speaker. A plastic spudger can aid in this process if it is inserted into the edge as shown and gently pried.

  6. Sony SRS-X55 Speaker Reverberator Replacement: paso 6, imagen 1 de 2 Sony SRS-X55 Speaker Reverberator Replacement: paso 6, imagen 2 de 2
    • Insert a plastic spudger into the seam where the forward facing metal speaker cover meets the speaker body and gently pry it upward until it releases.

  7. Sony SRS-X55 Speaker Reverberator Replacement: paso 7, imagen 1 de 2 Sony SRS-X55 Speaker Reverberator Replacement: paso 7, imagen 2 de 2
    • Locate the eight 8.9 mm screws on the face of the speaker assembly and remove them using a Phillips head #2 screwdriver.

  8. Sony SRS-X55 Speaker Reverberator Replacement: paso 8, imagen 1 de 2 Sony SRS-X55 Speaker Reverberator Replacement: paso 8, imagen 2 de 2
    • Insert a plastic spudger underneath one of the tabs on the front of the speaker assembly and gently raise it.

    • Continue to the next step before attempting to lift the speaker assembly entirely away from the rest of the speaker to avoid damaging internal wire connections.

  9. Sony SRS-X55 Speaker Reverberator Replacement: paso 9, imagen 1 de 3 Sony SRS-X55 Speaker Reverberator Replacement: paso 9, imagen 2 de 3 Sony SRS-X55 Speaker Reverberator Replacement: paso 9, imagen 3 de 3
    • Locate the two wire connections as shown underneath of the speaker assembly and unplug them using a pair of tweezers.

    • Lift the speaker assembly away.

  10. Sony SRS-X55 Speaker Reverberator Replacement: paso 10, imagen 1 de 2 Sony SRS-X55 Speaker Reverberator Replacement: paso 10, imagen 2 de 2
    • Locate the eight 7.5 mm screws across both of the speaker reverberators and remove them using a Phillips head #2 screwdriver.

    • Lift the speaker reverberators away and replace them.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Eric Coletto

Miembro Desde 01/26/17

113 Reputación

1 Guía escrita

Equipo

IUPUI, Team 2-3, Baechle Spring 2017 Miembro de IUPUI, Team 2-3, Baechle Spring 2017

IUPUI-BAECHLE-S17S2G3

3 Miembros

3 Guías creadas

Un comentario

Nice Guide, but do you know the exact speaker size and/or type?

I can not find the exact speakers.

THX

Elduderino79

El Duderino - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 12

Todo El Tiempo: 1,476