Repara tus cosas Comunidad Tienda

Sony SRS-X55 Input Board Replacement

Introducción

This guide is a walk through for how to remove and replace the input board for the Sony SRS-X55 speaker.

Qué necesitas

  1. Sony SRS-X55 Input Board Replacement, Input Board: paso 1, imagen 1 de 1

    • Locate the six 9 mm screws on the bottom of the SRS-X55 and remove them using a Phillips head #2 screwdriver.

    Editar

  2. Sony SRS-X55 Input Board Replacement: paso 2, imagen 1 de 2 Sony SRS-X55 Input Board Replacement: paso 2, imagen 2 de 2

    • Insert a plastic spudger at the seam of the bottom panel and remove it from the rest of the speaker.

    Editar

  3. Sony SRS-X55 Input Board Replacement: paso 3, imagen 1 de 3 Sony SRS-X55 Input Board Replacement: paso 3, imagen 2 de 3 Sony SRS-X55 Input Board Replacement: paso 3, imagen 3 de 3

    • Locate the battery plug and remove it using a pair of tweezers.

    Editar

  4. Sony SRS-X55 Input Board Replacement: paso 4, imagen 1 de 3 Sony SRS-X55 Input Board Replacement: paso 4, imagen 2 de 3 Sony SRS-X55 Input Board Replacement: paso 4, imagen 3 de 3

    • Locate the two 3.5 mm screws on the bottom of the I/O board and remove them using a Phillips head #2 screwdriver.

    Editar

  5. Sony SRS-X55 Input Board Replacement: paso 5, imagen 1 de 1

    • Use a plastic spudger to remove the I/O board from the speaker body.

    Editar

  7. Sony SRS-X55 Input Board Replacement: paso 6, imagen 1 de 2 Sony SRS-X55 Input Board Replacement: paso 6, imagen 2 de 2

    • Insert a plastic spudger into the seam of the metal speaker cover and pry it downward until it releases from the speaker body.

    Editar

  8. Sony SRS-X55 Input Board Replacement: paso 7, imagen 1 de 2 Sony SRS-X55 Input Board Replacement: paso 7, imagen 2 de 2

    • Locate the eight 8.9 mm screws on the face of the speaker assembly and remove them using a Phillips head #2 screwdriver.

    Editar

  9. Sony SRS-X55 Input Board Replacement: paso 8, imagen 1 de 2 Sony SRS-X55 Input Board Replacement: paso 8, imagen 2 de 2

    • Insert a plastic spudger underneath one of the tabs located on the front of the speaker assembly and gently raise the speaker assembly above the rest of the speaker.

    • Continue to the next step before attempting to lift the speaker assembly from the rest of the speaker entirely to avoid damaging internal wires.

    Editar

  10. Sony SRS-X55 Input Board Replacement: paso 9, imagen 1 de 3 Sony SRS-X55 Input Board Replacement: paso 9, imagen 2 de 3 Sony SRS-X55 Input Board Replacement: paso 9, imagen 3 de 3

    • Locate the two wire connections as shown underneath of the speaker assembly and unplug them using a pair of tweezers.

    Editar

  11. Sony SRS-X55 Input Board Replacement: paso 10, imagen 1 de 1

    • Locate the wire connecting the motherboard and the input board under the top panel of the speaker and remove it using a pair of tweezers.

    Editar

  12. Sony SRS-X55 Input Board Replacement: paso 11, imagen 1 de 3 Sony SRS-X55 Input Board Replacement: paso 11, imagen 2 de 3 Sony SRS-X55 Input Board Replacement: paso 11, imagen 3 de 3

    • Insert a plastic spudger into the seam at the edge of the top panel and gently pry it away from the rest of the speaker.

    • The spudger can be inserted laterally into the opening created by the spudger and slid along the top as shown to remove the panel in a single motion.

    Editar

  13. Sony SRS-X55 Input Board Replacement: paso 12, imagen 1 de 1

    • Locate the three 4.5 mm screws on top of the speaker input board and remove them using a Phillips head #2 screwdriver.

    Editar

  14. Sony SRS-X55 Input Board Replacement: paso 13, imagen 1 de 3 Sony SRS-X55 Input Board Replacement: paso 13, imagen 2 de 3 Sony SRS-X55 Input Board Replacement: paso 13, imagen 3 de 3

    • Insert a plastic spudger underneath the edge of the input board and gently pry it away from the rest of the speaker.

    Editar

    Is this input board available in the market?

    Manoj Acharya - Contestar

    If yes, where and what shall I ask while visiting the market.

    I'm from Mumbai

    Manoj Acharya - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Chris Sparzo

Miembro Desde 01/26/17

351 Reputación

2 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

IUPUI, Team 2-3, Baechle Spring 2017 Miembro de IUPUI, Team 2-3, Baechle Spring 2017

IUPUI-BAECHLE-S17S2G3

3 Miembros

3 Guías creadas

2 comentarios

Where I can find a new input board for my srs-x55??

luc belair - Contestar

I want to buy the sony input board.. can u pls help me on this

prafulpu - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 922